1195 lines
50 KiB
INI
1195 lines
50 KiB
INI
# Print profiles for the Cocoa Press.
|
||
|
||
[vendor]
|
||
repo_id = non-prusa-fff
|
||
# Vendor name will be shown by the Config Wizard.
|
||
name = Cocoa Press
|
||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||
config_version = 3.0.0
|
||
# Where to get the updates from?
|
||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/CocoaPress/
|
||
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||
|
||
# The printer models will be shown by the Configuration Wizard in this order,
|
||
# also the first model installed & the first nozzle installed will be activated after install.
|
||
# Printer model name will be shown by the installation wizard.
|
||
|
||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||
# not make it into the user interface.
|
||
|
||
[printer_model:Cocoa_Press]
|
||
name = Cocoa Press
|
||
variants = CCP1 0.8; CCP1 1.6
|
||
technology = FFF
|
||
bed_model = minichef_bed.stl
|
||
bed_texture = minichef_texture.svg
|
||
default_materials = Cocoa Press Chocolates;
|
||
thumbnail = CocoaPress_MiniChef.png
|
||
|
||
[printer_model:Cocoa_Press2]
|
||
name = Cocoa Press 2
|
||
variants = CCP2 0.8; CCP2 1.6
|
||
technology = FFF
|
||
bed_model = minichef_bed.stl
|
||
bed_texture = cocoapress2_PS_Bed_Texture.svg
|
||
default_materials = Cocoa Press Chocolates;
|
||
thumbnail = CocoaPress_CCP2.png
|
||
|
||
[print:Cocoa Press (0.5mm layerheight)]
|
||
inherits =
|
||
avoid_crossing_curled_overhangs = 0
|
||
avoid_crossing_perimeters = 0
|
||
avoid_crossing_perimeters_max_detour = 0
|
||
bottom_fill_pattern = rectilinear
|
||
bottom_solid_layers = 2
|
||
bottom_solid_min_thickness = 0
|
||
bridge_acceleration = 1500
|
||
bridge_angle = 0
|
||
bridge_flow_ratio = 1
|
||
bridge_speed = 20
|
||
brim_separation = 0
|
||
brim_type = outer_only
|
||
brim_width = 0
|
||
compatible_printers = "Cocoa Press｜0.8mm"
|
||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==0.8
|
||
complete_objects = 0
|
||
default_acceleration = 1500
|
||
dont_support_bridges = 1
|
||
draft_shield = disabled
|
||
elefant_foot_compensation = 0
|
||
enable_dynamic_overhang_speeds = 1
|
||
external_perimeter_acceleration = 0
|
||
external_perimeter_extrusion_width = 0
|
||
external_perimeter_speed = 25
|
||
external_perimeters_first = 0
|
||
extra_perimeters = 1
|
||
extra_perimeters_on_overhangs = 0
|
||
extrusion_width = 0
|
||
fill_angle = 45
|
||
fill_density = 25%
|
||
fill_pattern = grid
|
||
first_layer_acceleration = 1500
|
||
first_layer_acceleration_over_raft = 0
|
||
first_layer_extrusion_width = 0
|
||
first_layer_height = 0.4
|
||
first_layer_speed = 15
|
||
first_layer_speed_over_raft = 30
|
||
fuzzy_skin = none
|
||
fuzzy_skin_point_dist = 0.8
|
||
fuzzy_skin_thickness = 0.3
|
||
gap_fill_enabled = 0
|
||
gap_fill_speed = 0
|
||
gcode_comments = 0
|
||
gcode_label_objects = 1
|
||
gcode_resolution = 0.0125
|
||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||
infill_acceleration = 1500
|
||
infill_anchor = 600%
|
||
infill_anchor_max = 50
|
||
infill_every_layers = 1
|
||
infill_extruder = 1
|
||
infill_extrusion_width = 0
|
||
infill_first = 0
|
||
infill_overlap = 50%
|
||
infill_speed = 40
|
||
interface_shells = 0
|
||
ironing = 0
|
||
ironing_flowrate = 15%
|
||
ironing_spacing = 0.1
|
||
ironing_speed = 15
|
||
ironing_type = top
|
||
layer_height = 0.5
|
||
max_print_speed = 80
|
||
max_volumetric_extrusion_rate_slope_negative = 0
|
||
max_volumetric_extrusion_rate_slope_positive = 0
|
||
max_volumetric_speed = 0
|
||
min_bead_width = 85%
|
||
min_feature_size = 25%
|
||
min_skirt_length = 0
|
||
mmu_segmented_region_max_width = 0
|
||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||
only_retract_when_crossing_perimeters = 0
|
||
ooze_prevention = 0
|
||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||
overhang_speed_0 = 12
|
||
overhang_speed_1 = 15
|
||
overhang_speed_2 = 20
|
||
overhang_speed_3 = 25
|
||
overhangs = 1
|
||
perimeter_acceleration = 1500
|
||
perimeter_extruder = 1
|
||
perimeter_extrusion_width = 0
|
||
perimeter_generator = arachne
|
||
perimeter_speed = 35
|
||
perimeters = 2
|
||
post_process =
|
||
print_settings_id = 0.5mm Speed2
|
||
raft_contact_distance = 0.1
|
||
raft_expansion = 1.5
|
||
raft_first_layer_density = 90%
|
||
raft_first_layer_expansion = 3
|
||
raft_layers = 0
|
||
resolution = 0
|
||
seam_position = rear
|
||
single_extruder_multi_material_priming = 1
|
||
skirt_distance = 5
|
||
skirt_height = 1
|
||
skirts = 0
|
||
slice_closing_radius = 0.049
|
||
slicing_mode = regular
|
||
small_perimeter_speed = 20
|
||
solid_infill_acceleration = 0
|
||
solid_infill_below_area = 70
|
||
solid_infill_every_layers = 0
|
||
solid_infill_extruder = 1
|
||
solid_infill_extrusion_width = 0
|
||
solid_infill_speed = 40
|
||
spiral_vase = 0
|
||
staggered_inner_seams = 0
|
||
standby_temperature_delta = -5
|
||
support_material = 0
|
||
support_material_angle = 0
|
||
support_material_auto = 0
|
||
support_material_bottom_contact_distance = 0
|
||
support_material_bottom_interface_layers = -1
|
||
support_material_buildplate_only = 0
|
||
support_material_closing_radius = 2
|
||
support_material_contact_distance = 0.2
|
||
support_material_enforce_layers = 0
|
||
support_material_extruder = 0
|
||
support_material_extrusion_width = 0
|
||
support_material_interface_contact_loops = 0
|
||
support_material_interface_extruder = 1
|
||
support_material_interface_layers = 0
|
||
support_material_interface_pattern = rectilinear
|
||
support_material_interface_spacing = 0
|
||
support_material_interface_speed = 100%
|
||
support_material_pattern = honeycomb
|
||
support_material_spacing = 5
|
||
support_material_speed = 25
|
||
support_material_style = organic
|
||
support_material_synchronize_layers = 0
|
||
support_material_threshold = 0
|
||
support_material_with_sheath = 0
|
||
support_material_xy_spacing = 50%
|
||
support_tree_angle = 40
|
||
support_tree_angle_slow = 25
|
||
support_tree_branch_diameter = 2
|
||
support_tree_branch_diameter_angle = 5
|
||
support_tree_branch_diameter_double_wall = 3
|
||
support_tree_branch_distance = 1
|
||
support_tree_tip_diameter = 0.8
|
||
support_tree_top_rate = 15%
|
||
thick_bridges = 1
|
||
thin_walls = 0
|
||
threads = 12
|
||
top_fill_pattern = rectilinear
|
||
top_infill_extrusion_width = 0
|
||
top_solid_infill_acceleration = 0
|
||
top_solid_infill_speed = 25
|
||
top_solid_layers = 5
|
||
top_solid_min_thickness = 0
|
||
travel_acceleration = 0
|
||
travel_speed = 100
|
||
travel_speed_z = 0
|
||
wall_distribution_count = 1
|
||
wall_transition_angle = 10
|
||
wall_transition_filter_deviation = 25%
|
||
wall_transition_length = 100%
|
||
wipe_tower = 0
|
||
wipe_tower_bridging = 10
|
||
wipe_tower_brim_width = 2
|
||
wipe_tower_cone_angle = 0
|
||
wipe_tower_extra_spacing = 100%
|
||
wipe_tower_extruder = 0
|
||
wipe_tower_no_sparse_layers = 0
|
||
wipe_tower_rotation_angle = 0
|
||
wipe_tower_width = 60
|
||
wipe_tower_x = 180
|
||
wipe_tower_y = 140
|
||
xy_size_compensation = 0
|
||
|
||
[print:Cocoa Press (1.0mm layerheight)]
|
||
inherits =
|
||
avoid_crossing_curled_overhangs = 0
|
||
avoid_crossing_perimeters = 0
|
||
avoid_crossing_perimeters_max_detour = 0
|
||
bottom_fill_pattern = rectilinear
|
||
bottom_solid_layers = 1
|
||
bottom_solid_min_thickness = 0
|
||
bridge_acceleration = 1500
|
||
bridge_angle = 0
|
||
bridge_flow_ratio = 1
|
||
bridge_speed = 20
|
||
brim_separation = 0
|
||
brim_type = outer_only
|
||
brim_width = 0
|
||
compatible_printers = "Cocoa Press｜1.6mm"
|
||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==1.6
|
||
complete_objects = 0
|
||
default_acceleration = 1500
|
||
dont_support_bridges = 1
|
||
draft_shield = disabled
|
||
elefant_foot_compensation = 0
|
||
enable_dynamic_overhang_speeds = 1
|
||
external_perimeter_acceleration = 0
|
||
external_perimeter_extrusion_width = 0
|
||
external_perimeter_speed = 25
|
||
external_perimeters_first = 0
|
||
extra_perimeters = 1
|
||
extra_perimeters_on_overhangs = 0
|
||
extrusion_width = 0
|
||
fill_angle = 45
|
||
fill_density = 25%
|
||
fill_pattern = grid
|
||
first_layer_acceleration = 1500
|
||
first_layer_acceleration_over_raft = 0
|
||
first_layer_extrusion_width = 0
|
||
first_layer_height = 0.8
|
||
first_layer_speed = 15
|
||
first_layer_speed_over_raft = 30
|
||
fuzzy_skin = none
|
||
fuzzy_skin_point_dist = 0.8
|
||
fuzzy_skin_thickness = 0.3
|
||
gap_fill_enabled = 0
|
||
gap_fill_speed = 0
|
||
gcode_comments = 0
|
||
gcode_label_objects = 1
|
||
gcode_resolution = 0.0125
|
||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||
infill_acceleration = 1500
|
||
infill_anchor = 600%
|
||
infill_anchor_max = 50
|
||
infill_every_layers = 1
|
||
infill_extruder = 1
|
||
infill_extrusion_width = 0
|
||
infill_first = 0
|
||
infill_overlap = 70%
|
||
infill_speed = 40
|
||
interface_shells = 0
|
||
ironing = 0
|
||
ironing_flowrate = 15%
|
||
ironing_spacing = 0.1
|
||
ironing_speed = 15
|
||
ironing_type = top
|
||
layer_height = 1
|
||
max_print_speed = 80
|
||
max_volumetric_extrusion_rate_slope_negative = 0
|
||
max_volumetric_extrusion_rate_slope_positive = 0
|
||
max_volumetric_speed = 0
|
||
min_bead_width = 85%
|
||
min_feature_size = 25%
|
||
min_skirt_length = 0
|
||
mmu_segmented_region_max_width = 0
|
||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||
only_retract_when_crossing_perimeters = 0
|
||
ooze_prevention = 0
|
||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||
overhang_speed_0 = 12
|
||
overhang_speed_1 = 15
|
||
overhang_speed_2 = 20
|
||
overhang_speed_3 = 25
|
||
overhangs = 1
|
||
perimeter_acceleration = 1500
|
||
perimeter_extruder = 1
|
||
perimeter_extrusion_width = 0
|
||
perimeter_generator = arachne
|
||
perimeter_speed = 35
|
||
perimeters = 1
|
||
post_process =
|
||
print_settings_id = 0.5mm Speed2
|
||
raft_contact_distance = 0.1
|
||
raft_expansion = 1.5
|
||
raft_first_layer_density = 90%
|
||
raft_first_layer_expansion = 3
|
||
raft_layers = 0
|
||
resolution = 0
|
||
seam_position = rear
|
||
single_extruder_multi_material_priming = 1
|
||
skirt_distance = 5
|
||
skirt_height = 1
|
||
skirts = 0
|
||
slice_closing_radius = 0.049
|
||
slicing_mode = regular
|
||
small_perimeter_speed = 20
|
||
solid_infill_acceleration = 0
|
||
solid_infill_below_area = 70
|
||
solid_infill_every_layers = 0
|
||
solid_infill_extruder = 1
|
||
solid_infill_extrusion_width = 0
|
||
solid_infill_speed = 40
|
||
spiral_vase = 0
|
||
staggered_inner_seams = 0
|
||
standby_temperature_delta = -5
|
||
support_material = 0
|
||
support_material_angle = 0
|
||
support_material_auto = 0
|
||
support_material_bottom_contact_distance = 0
|
||
support_material_bottom_interface_layers = -1
|
||
support_material_buildplate_only = 0
|
||
support_material_closing_radius = 2
|
||
support_material_contact_distance = 0.2
|
||
support_material_enforce_layers = 0
|
||
support_material_extruder = 0
|
||
support_material_extrusion_width = 0
|
||
support_material_interface_contact_loops = 0
|
||
support_material_interface_extruder = 1
|
||
support_material_interface_layers = 0
|
||
support_material_interface_pattern = rectilinear
|
||
support_material_interface_spacing = 0
|
||
support_material_interface_speed = 100%
|
||
support_material_pattern = honeycomb
|
||
support_material_spacing = 5
|
||
support_material_speed = 25
|
||
support_material_style = grid
|
||
support_material_synchronize_layers = 0
|
||
support_material_threshold = 0
|
||
support_material_with_sheath = 0
|
||
support_material_xy_spacing = 50%
|
||
support_tree_angle = 40
|
||
support_tree_angle_slow = 25
|
||
support_tree_branch_diameter = 2
|
||
support_tree_branch_diameter_angle = 5
|
||
support_tree_branch_diameter_double_wall = 3
|
||
support_tree_branch_distance = 1
|
||
support_tree_tip_diameter = 0.8
|
||
support_tree_top_rate = 15%
|
||
thick_bridges = 1
|
||
thin_walls = 0
|
||
threads = 12
|
||
top_fill_pattern = rectilinear
|
||
top_infill_extrusion_width = 0
|
||
top_solid_infill_acceleration = 0
|
||
top_solid_infill_speed = 25
|
||
top_solid_layers = 3
|
||
top_solid_min_thickness = 0
|
||
travel_acceleration = 0
|
||
travel_speed = 100
|
||
travel_speed_z = 0
|
||
wall_distribution_count = 1
|
||
wall_transition_angle = 10
|
||
wall_transition_filter_deviation = 25%
|
||
wall_transition_length = 100%
|
||
wipe_tower = 0
|
||
wipe_tower_bridging = 10
|
||
wipe_tower_brim_width = 2
|
||
wipe_tower_cone_angle = 0
|
||
wipe_tower_extra_spacing = 100%
|
||
wipe_tower_extruder = 0
|
||
wipe_tower_no_sparse_layers = 0
|
||
wipe_tower_rotation_angle = 0
|
||
wipe_tower_width = 60
|
||
wipe_tower_x = 180
|
||
wipe_tower_y = 140
|
||
xy_size_compensation = 0
|
||
|
||
[print:Cocoa Press 2 (0.5mm layerheight)]
|
||
arc_fitting = emit_center
|
||
automatic_extrusion_widths = 0
|
||
automatic_infill_combination = 0
|
||
automatic_infill_combination_max_layer_height = 100%
|
||
avoid_crossing_curled_overhangs = 0
|
||
avoid_crossing_perimeters = 0
|
||
avoid_crossing_perimeters_max_detour = 0
|
||
bed_temperature_extruder = 0
|
||
bottom_fill_pattern = rectilinear
|
||
bottom_solid_layers = 2
|
||
bottom_solid_min_thickness = 0
|
||
bridge_acceleration = 1500
|
||
bridge_angle = 0
|
||
bridge_flow_ratio = 1
|
||
bridge_speed = 20
|
||
brim_separation = 0
|
||
brim_type = outer_only
|
||
brim_width = 0
|
||
compatible_printers = "Cocoa Press 2｜0.8mm"
|
||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==0.8
|
||
complete_objects = 0
|
||
default_acceleration = 1500
|
||
dont_support_bridges = 1
|
||
draft_shield = disabled
|
||
elefant_foot_compensation = 0
|
||
enable_dynamic_overhang_speeds = 1
|
||
ensure_vertical_shell_thickness = enabled
|
||
external_perimeter_acceleration = 0
|
||
external_perimeter_extrusion_width = 0
|
||
external_perimeter_speed = 25
|
||
external_perimeters_first = 0
|
||
extra_perimeters = 1
|
||
extra_perimeters_on_overhangs = 0
|
||
extrusion_width = 0
|
||
fill_angle = 45
|
||
fill_density = 25%
|
||
fill_pattern = grid
|
||
first_layer_acceleration = 1500
|
||
first_layer_acceleration_over_raft = 0
|
||
first_layer_extrusion_width = 0
|
||
first_layer_height = 0.4
|
||
first_layer_infill_speed = 0
|
||
first_layer_speed = 15
|
||
first_layer_speed_over_raft = 30
|
||
fuzzy_skin = none
|
||
fuzzy_skin_point_dist = 0.8
|
||
fuzzy_skin_thickness = 0.3
|
||
gap_fill_enabled = 0
|
||
gap_fill_speed = 0
|
||
gcode_comments = 0
|
||
gcode_label_objects = octoprint
|
||
gcode_resolution = 0.0125
|
||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||
infill_acceleration = 1500
|
||
infill_anchor = 600%
|
||
infill_anchor_max = 50
|
||
infill_every_layers = 1
|
||
infill_extruder = 1
|
||
infill_extrusion_width = 0
|
||
infill_first = 0
|
||
infill_overlap = 50%
|
||
infill_speed = 40
|
||
inherits = Cocoa Press (0.5mm layerheight)
|
||
interface_shells = 0
|
||
interlocking_beam = 0
|
||
interlocking_beam_layer_count = 2
|
||
interlocking_beam_width = 0.8
|
||
interlocking_boundary_avoidance = 2
|
||
interlocking_depth = 2
|
||
interlocking_orientation = 22.5
|
||
ironing = 0
|
||
ironing_flowrate = 15%
|
||
ironing_spacing = 0.1
|
||
ironing_speed = 15
|
||
ironing_type = top
|
||
layer_height = 0.5
|
||
max_print_speed = 80
|
||
max_volumetric_extrusion_rate_slope_negative = 0
|
||
max_volumetric_extrusion_rate_slope_positive = 0
|
||
max_volumetric_speed = 0
|
||
min_bead_width = 85%
|
||
min_feature_size = 25%
|
||
min_skirt_length = 0
|
||
mmu_segmented_region_interlocking_depth = 0
|
||
mmu_segmented_region_max_width = 0
|
||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||
only_one_perimeter_first_layer = 0
|
||
only_retract_when_crossing_perimeters = 0
|
||
ooze_prevention = 0
|
||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||
over_bridge_speed = 0
|
||
overhang_speed_0 = 12
|
||
overhang_speed_1 = 15
|
||
overhang_speed_2 = 20
|
||
overhang_speed_3 = 25
|
||
overhangs = 1
|
||
perimeter_acceleration = 1500
|
||
perimeter_extruder = 1
|
||
perimeter_extrusion_width = 0
|
||
perimeter_generator = arachne
|
||
perimeter_speed = 35
|
||
perimeters = 2
|
||
post_process =
|
||
print_settings_id = 0.5mm Speed2
|
||
raft_contact_distance = 0.1
|
||
raft_expansion = 1.5
|
||
raft_first_layer_density = 90%
|
||
raft_first_layer_expansion = 3
|
||
raft_layers = 0
|
||
resolution = 0
|
||
scarf_seam_entire_loop = 0
|
||
scarf_seam_length = 20
|
||
scarf_seam_max_segment_length = 1
|
||
scarf_seam_on_inner_perimeters = 0
|
||
scarf_seam_only_on_smooth = 1
|
||
scarf_seam_placement = nowhere
|
||
scarf_seam_start_height = 0%
|
||
seam_gap_distance = 15%
|
||
seam_position = rear
|
||
single_extruder_multi_material_priming = 1
|
||
skirt_distance = 5
|
||
skirt_height = 1
|
||
skirts = 0
|
||
slice_closing_radius = 0.049
|
||
slicing_mode = regular
|
||
small_perimeter_speed = 20
|
||
solid_infill_acceleration = 0
|
||
solid_infill_below_area = 70
|
||
solid_infill_every_layers = 0
|
||
solid_infill_extruder = 1
|
||
solid_infill_extrusion_width = 0
|
||
solid_infill_speed = 40
|
||
spiral_vase = 0
|
||
staggered_inner_seams = 0
|
||
standby_temperature_delta = -5
|
||
support_material = 0
|
||
support_material_angle = 0
|
||
support_material_auto = 0
|
||
support_material_bottom_contact_distance = 0
|
||
support_material_bottom_interface_layers = -1
|
||
support_material_buildplate_only = 0
|
||
support_material_closing_radius = 2
|
||
support_material_contact_distance = 0.2
|
||
support_material_enforce_layers = 0
|
||
support_material_extruder = 0
|
||
support_material_extrusion_width = 0
|
||
support_material_interface_contact_loops = 0
|
||
support_material_interface_extruder = 1
|
||
support_material_interface_layers = 0
|
||
support_material_interface_pattern = rectilinear
|
||
support_material_interface_spacing = 0
|
||
support_material_interface_speed = 100%
|
||
support_material_pattern = honeycomb
|
||
support_material_spacing = 5
|
||
support_material_speed = 25
|
||
support_material_style = organic
|
||
support_material_synchronize_layers = 0
|
||
support_material_threshold = 0
|
||
support_material_with_sheath = 0
|
||
support_material_xy_spacing = 50%
|
||
support_tree_angle = 40
|
||
support_tree_angle_slow = 25
|
||
support_tree_branch_diameter = 2
|
||
support_tree_branch_diameter_angle = 5
|
||
support_tree_branch_diameter_double_wall = 3
|
||
support_tree_branch_distance = 1
|
||
support_tree_tip_diameter = 0.8
|
||
support_tree_top_rate = 15%
|
||
thick_bridges = 1
|
||
thin_walls = 0
|
||
top_fill_pattern = rectilinear
|
||
top_infill_extrusion_width = 0
|
||
top_one_perimeter_type = none
|
||
top_solid_infill_acceleration = 0
|
||
top_solid_infill_speed = 25
|
||
top_solid_layers = 5
|
||
top_solid_min_thickness = 0
|
||
travel_acceleration = 0
|
||
travel_speed = 100
|
||
travel_speed_z = 0
|
||
wall_distribution_count = 1
|
||
wall_transition_angle = 10
|
||
wall_transition_filter_deviation = 25%
|
||
wall_transition_length = 100%
|
||
wipe_tower = 0
|
||
wipe_tower_acceleration = 0
|
||
wipe_tower_bridging = 10
|
||
wipe_tower_brim_width = 2
|
||
wipe_tower_cone_angle = 0
|
||
wipe_tower_extra_flow = 100%
|
||
wipe_tower_extra_spacing = 100%
|
||
wipe_tower_extruder = 0
|
||
wipe_tower_no_sparse_layers = 0
|
||
wipe_tower_width = 60
|
||
xy_size_compensation = 0
|
||
|
||
[print:Cocoa Press 2 (1.0mm layerheight)]
|
||
arc_fitting = emit_center
|
||
automatic_extrusion_widths = 0
|
||
automatic_infill_combination = 0
|
||
automatic_infill_combination_max_layer_height = 100%
|
||
avoid_crossing_curled_overhangs = 0
|
||
avoid_crossing_perimeters = 0
|
||
avoid_crossing_perimeters_max_detour = 0
|
||
bed_temperature_extruder = 0
|
||
bottom_fill_pattern = rectilinear
|
||
bottom_solid_layers = 2
|
||
bottom_solid_min_thickness = 0
|
||
bridge_acceleration = 1500
|
||
bridge_angle = 0
|
||
bridge_flow_ratio = 1
|
||
bridge_speed = 20
|
||
brim_separation = 0
|
||
brim_type = outer_only
|
||
brim_width = 0
|
||
compatible_printers = "Cocoa Press 2｜1.6mm"
|
||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/ and printer_notes=~/.*PRINTER_MATERIAL_PASTE.*/ and nozzle_diameter[0]==1.6
|
||
complete_objects = 0
|
||
default_acceleration = 1500
|
||
dont_support_bridges = 1
|
||
draft_shield = disabled
|
||
elefant_foot_compensation = 0
|
||
enable_dynamic_overhang_speeds = 1
|
||
ensure_vertical_shell_thickness = enabled
|
||
external_perimeter_acceleration = 0
|
||
external_perimeter_extrusion_width = 0
|
||
external_perimeter_speed = 25
|
||
external_perimeters_first = 0
|
||
extra_perimeters = 1
|
||
extra_perimeters_on_overhangs = 0
|
||
extrusion_width = 0
|
||
fill_angle = 45
|
||
fill_density = 25%
|
||
fill_pattern = grid
|
||
first_layer_acceleration = 1500
|
||
first_layer_acceleration_over_raft = 0
|
||
first_layer_extrusion_width = 0
|
||
first_layer_height = 0.4
|
||
first_layer_infill_speed = 0
|
||
first_layer_speed = 15
|
||
first_layer_speed_over_raft = 30
|
||
fuzzy_skin = none
|
||
fuzzy_skin_point_dist = 0.8
|
||
fuzzy_skin_thickness = 0.3
|
||
gap_fill_enabled = 0
|
||
gap_fill_speed = 0
|
||
gcode_comments = 0
|
||
gcode_label_objects = octoprint
|
||
gcode_resolution = 0.0125
|
||
gcode_substitutions = "(;PAUSE_PRINT)(\\n|\\r\\n|\\r)(.*?)(M117)";"\\n;MOVE_BEFORE_PAUSE\\n;PAUSED_PRINT_MACRO\\n;END_MOVE_BEFORE_PAUSE\\n$1$2M0";r;"Pause command allows you to get a full screen message.";"(;PAUSED_PRINT_MACRO)(.*?)(\\n|\\r\\n|\\r)";"\\nM83;\\nG1 E-.2 F400;\\nG91;\\nG0 Z10;\\nG90;\\nM83;\\nG0 X70 Y135 F90000;\\nM17;\\n";r;"The second half of the \"manual pause\" is in the custom g-code box in Printer Settings."
|
||
infill_acceleration = 1500
|
||
infill_anchor = 600%
|
||
infill_anchor_max = 50
|
||
infill_every_layers = 1
|
||
infill_extruder = 1
|
||
infill_extrusion_width = 0
|
||
infill_first = 0
|
||
infill_overlap = 50%
|
||
infill_speed = 40
|
||
inherits = Cocoa Press (0.5mm layerheight)
|
||
interface_shells = 0
|
||
interlocking_beam = 0
|
||
interlocking_beam_layer_count = 2
|
||
interlocking_beam_width = 0.8
|
||
interlocking_boundary_avoidance = 2
|
||
interlocking_depth = 2
|
||
interlocking_orientation = 22.5
|
||
ironing = 0
|
||
ironing_flowrate = 15%
|
||
ironing_spacing = 0.1
|
||
ironing_speed = 15
|
||
ironing_type = top
|
||
layer_height = 1.0
|
||
max_print_speed = 80
|
||
max_volumetric_extrusion_rate_slope_negative = 0
|
||
max_volumetric_extrusion_rate_slope_positive = 0
|
||
max_volumetric_speed = 0
|
||
min_bead_width = 85%
|
||
min_feature_size = 25%
|
||
min_skirt_length = 0
|
||
mmu_segmented_region_interlocking_depth = 0
|
||
mmu_segmented_region_max_width = 0
|
||
notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE
|
||
only_one_perimeter_first_layer = 0
|
||
only_retract_when_crossing_perimeters = 0
|
||
ooze_prevention = 0
|
||
output_filename_format = {input_filename_base}_{nozzle_diameter[initial_tool]}n_{print_time}_{round(total_weight)}g.gcode
|
||
over_bridge_speed = 0
|
||
overhang_speed_0 = 12
|
||
overhang_speed_1 = 15
|
||
overhang_speed_2 = 20
|
||
overhang_speed_3 = 25
|
||
overhangs = 1
|
||
perimeter_acceleration = 1500
|
||
perimeter_extruder = 1
|
||
perimeter_extrusion_width = 0
|
||
perimeter_generator = arachne
|
||
perimeter_speed = 35
|
||
perimeters = 2
|
||
post_process =
|
||
print_settings_id = 0.5mm Speed2
|
||
raft_contact_distance = 0.1
|
||
raft_expansion = 1.5
|
||
raft_first_layer_density = 90%
|
||
raft_first_layer_expansion = 3
|
||
raft_layers = 0
|
||
resolution = 0
|
||
scarf_seam_entire_loop = 0
|
||
scarf_seam_length = 20
|
||
scarf_seam_max_segment_length = 1
|
||
scarf_seam_on_inner_perimeters = 0
|
||
scarf_seam_only_on_smooth = 1
|
||
scarf_seam_placement = nowhere
|
||
scarf_seam_start_height = 0%
|
||
seam_gap_distance = 15%
|
||
seam_position = rear
|
||
single_extruder_multi_material_priming = 1
|
||
skirt_distance = 5
|
||
skirt_height = 1
|
||
skirts = 0
|
||
slice_closing_radius = 0.049
|
||
slicing_mode = regular
|
||
small_perimeter_speed = 20
|
||
solid_infill_acceleration = 0
|
||
solid_infill_below_area = 70
|
||
solid_infill_every_layers = 0
|
||
solid_infill_extruder = 1
|
||
solid_infill_extrusion_width = 0
|
||
solid_infill_speed = 40
|
||
spiral_vase = 0
|
||
staggered_inner_seams = 0
|
||
standby_temperature_delta = -5
|
||
support_material = 0
|
||
support_material_angle = 0
|
||
support_material_auto = 0
|
||
support_material_bottom_contact_distance = 0
|
||
support_material_bottom_interface_layers = -1
|
||
support_material_buildplate_only = 0
|
||
support_material_closing_radius = 2
|
||
support_material_contact_distance = 0.2
|
||
support_material_enforce_layers = 0
|
||
support_material_extruder = 0
|
||
support_material_extrusion_width = 0
|
||
support_material_interface_contact_loops = 0
|
||
support_material_interface_extruder = 1
|
||
support_material_interface_layers = 0
|
||
support_material_interface_pattern = rectilinear
|
||
support_material_interface_spacing = 0
|
||
support_material_interface_speed = 100%
|
||
support_material_pattern = honeycomb
|
||
support_material_spacing = 5
|
||
support_material_speed = 25
|
||
support_material_style = organic
|
||
support_material_synchronize_layers = 0
|
||
support_material_threshold = 0
|
||
support_material_with_sheath = 0
|
||
support_material_xy_spacing = 50%
|
||
support_tree_angle = 40
|
||
support_tree_angle_slow = 25
|
||
support_tree_branch_diameter = 2
|
||
support_tree_branch_diameter_angle = 5
|
||
support_tree_branch_diameter_double_wall = 3
|
||
support_tree_branch_distance = 1
|
||
support_tree_tip_diameter = 0.8
|
||
support_tree_top_rate = 15%
|
||
thick_bridges = 1
|
||
thin_walls = 0
|
||
top_fill_pattern = rectilinear
|
||
top_infill_extrusion_width = 0
|
||
top_one_perimeter_type = none
|
||
top_solid_infill_acceleration = 0
|
||
top_solid_infill_speed = 25
|
||
top_solid_layers = 5
|
||
top_solid_min_thickness = 0
|
||
travel_acceleration = 0
|
||
travel_speed = 100
|
||
travel_speed_z = 0
|
||
wall_distribution_count = 1
|
||
wall_transition_angle = 10
|
||
wall_transition_filter_deviation = 25%
|
||
wall_transition_length = 100%
|
||
wipe_tower = 0
|
||
wipe_tower_acceleration = 0
|
||
wipe_tower_bridging = 10
|
||
wipe_tower_brim_width = 2
|
||
wipe_tower_cone_angle = 0
|
||
wipe_tower_extra_flow = 100%
|
||
wipe_tower_extra_spacing = 100%
|
||
wipe_tower_extruder = 0
|
||
wipe_tower_no_sparse_layers = 0
|
||
wipe_tower_width = 60
|
||
xy_size_compensation = 0
|
||
|
||
[filament:*common*]
|
||
bed_temperature = 0
|
||
bridge_fan_speed = 0
|
||
cooling = 0
|
||
disable_fan_first_layers = 3
|
||
enable_dynamic_fan_speeds = 0
|
||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||
extrusion_multiplier = 1
|
||
fan_always_on = 0
|
||
fan_below_layer_time = 60
|
||
filament_colour = #3D2113
|
||
filament_cooling_final_speed = 3.4
|
||
filament_cooling_initial_speed = 2.2
|
||
filament_cooling_moves = 4
|
||
filament_cost = 70
|
||
filament_density = 1.2912
|
||
filament_deretract_speed = nil
|
||
filament_diameter = 22.66
|
||
filament_load_time = 0
|
||
filament_loading_speed = 28
|
||
filament_loading_speed_start = 3
|
||
filament_max_volumetric_speed = 0
|
||
filament_minimal_purge_on_wipe_tower = 15
|
||
filament_notes = ""
|
||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||
filament_retract_before_travel = nil
|
||
filament_retract_before_wipe = nil
|
||
filament_retract_layer_change = nil
|
||
filament_retract_length = nil
|
||
filament_retract_lift = nil
|
||
filament_retract_lift_above = nil
|
||
filament_retract_lift_below = nil
|
||
filament_retract_restart_extra = nil
|
||
filament_retract_speed = nil
|
||
filament_soluble = 0
|
||
filament_spool_weight = 0
|
||
filament_toolchange_delay = 0
|
||
filament_unload_time = 0
|
||
filament_unloading_speed = 90
|
||
filament_unloading_speed_start = 100
|
||
filament_vendor = Cocoa Press
|
||
filament_wipe = 1
|
||
first_layer_bed_temperature = 0
|
||
first_layer_temperature = 0
|
||
full_fan_speed_layer = 0
|
||
idle_temperature = nil
|
||
max_fan_speed = 100
|
||
min_fan_speed = 35
|
||
min_print_speed = 10
|
||
overhang_fan_speed_0 = 0
|
||
overhang_fan_speed_1 = 0
|
||
overhang_fan_speed_2 = 0
|
||
overhang_fan_speed_3 = 0
|
||
slowdown_below_layer_time = 5
|
||
start_filament_gcode = "; Filament gcode\n"
|
||
|
||
[filament:Cocoa Press Chocolates]
|
||
inherits = *common*
|
||
temperature = 0
|
||
filament_vendor = Cocoa Press
|
||
filament_settings_id = "Cocoa Press Chocolate"
|
||
filament_type = CHOCOLATE
|
||
compatible_printers =
|
||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_COCOA_PRESS.*/
|
||
|
||
[printer:*CCP1 0.8mm*]
|
||
printer_variant = CCP1 0.8
|
||
default_print_profile = 0.5
|
||
autoemit_temperature_commands = 0
|
||
bed_shape = 0x0,140x0,140x150,0x150
|
||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||
between_objects_gcode =
|
||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\n; restore position\nG61; \n\n;AFTER_COLOR_CHANGE
|
||
cooling_tube_length = 5
|
||
cooling_tube_retraction = 91.5
|
||
deretract_speed = 15
|
||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||
extra_loading_move = -2
|
||
extruder_colour = #F27121
|
||
extruder_offset = 0x0
|
||
high_current_on_filament_swap = 0
|
||
host_type = octoprint
|
||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||
machine_limits_usage = time_estimate_only
|
||
machine_max_acceleration_e = 1500
|
||
machine_max_acceleration_extruding = 1500
|
||
machine_max_acceleration_retracting = 1500
|
||
machine_max_acceleration_travel = 1500,1250
|
||
machine_max_acceleration_x = 1500
|
||
machine_max_acceleration_y = 1500
|
||
machine_max_acceleration_z = 500
|
||
machine_max_feedrate_e = 120
|
||
machine_max_feedrate_x = 500
|
||
machine_max_feedrate_y = 500
|
||
machine_max_feedrate_z = 12
|
||
machine_max_jerk_e = 2.5
|
||
machine_max_jerk_x = 10
|
||
machine_max_jerk_y = 10
|
||
machine_max_jerk_z = 0.2
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 0
|
||
max_layer_height = 0.8
|
||
max_print_height = 150
|
||
min_layer_height = 0.2
|
||
nozzle_diameter = 0.8
|
||
parking_pos_retraction = 92
|
||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||
print_host =
|
||
printer_settings_id = cocoa_press_minichef_settings_0_8
|
||
printer_technology = FFF
|
||
printer_vendor =
|
||
printhost_apikey =
|
||
printhost_cafile =
|
||
remaining_times = 0
|
||
retract_before_travel = 3
|
||
retract_before_wipe = 0%
|
||
retract_layer_change = 0
|
||
retract_length = 1
|
||
retract_length_toolchange = 10
|
||
retract_lift = 1
|
||
retract_lift_above = 0
|
||
retract_lift_below = 0
|
||
retract_restart_extra = 0
|
||
retract_restart_extra_toolchange = 0
|
||
retract_speed = 15
|
||
silent_mode = 0
|
||
single_extruder_multi_material = 0
|
||
start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing + loading mesh\nG29 O V4 ; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y148 Z3.2\nG1 X128.625 Y148 Z.5 E.15\nG1 X8.25 Y148 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y145 F900\nG1 X131.25 Y145 E.10538\nG1 X141.75 Y145
|
||
template_custom_gcode =
|
||
thumbnails = 64x64,400x300
|
||
thumbnails_format = PNG
|
||
toolchange_gcode =
|
||
use_firmware_retraction = 0
|
||
use_relative_e_distances = 1
|
||
use_volumetric_e = 0
|
||
variable_layer_height = 1
|
||
wipe = 1
|
||
z_offset = 0
|
||
|
||
[printer:*CCP1 1.6mm*]
|
||
printer_variant = CCP1 1.6
|
||
autoemit_temperature_commands = 0
|
||
bed_shape = 0x0,140x0,140x150,0x150
|
||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||
between_objects_gcode =
|
||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\nG61; restore start position\n;AFTER_COLOR_CHANGE
|
||
cooling_tube_length = 5
|
||
cooling_tube_retraction = 91.5
|
||
default_print_profile = 1.0
|
||
deretract_speed = 15
|
||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||
extra_loading_move = -2
|
||
extruder_colour = #F27121
|
||
extruder_offset = 0x0
|
||
high_current_on_filament_swap = 0
|
||
host_type = octoprint
|
||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||
machine_limits_usage = time_estimate_only
|
||
machine_max_acceleration_e = 1500
|
||
machine_max_acceleration_extruding = 1500
|
||
machine_max_acceleration_retracting = 1500
|
||
machine_max_acceleration_travel = 1500,1250
|
||
machine_max_acceleration_x = 1500
|
||
machine_max_acceleration_y = 1500
|
||
machine_max_acceleration_z = 500
|
||
machine_max_feedrate_e = 120
|
||
machine_max_feedrate_x = 500
|
||
machine_max_feedrate_y = 500
|
||
machine_max_feedrate_z = 12
|
||
machine_max_jerk_e = 2.5
|
||
machine_max_jerk_x = 10
|
||
machine_max_jerk_y = 10
|
||
machine_max_jerk_z = 0.2
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 0
|
||
max_layer_height = 1.6
|
||
max_print_height = 150
|
||
min_layer_height = 0.2
|
||
nozzle_diameter = 1.6
|
||
parking_pos_retraction = 92
|
||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||
print_host =
|
||
printer_settings_id = cocoa_press_minichef_settings_1_6
|
||
printer_technology = FFF
|
||
printer_vendor =
|
||
printhost_apikey =
|
||
printhost_cafile =
|
||
remaining_times = 0
|
||
retract_before_travel = 3
|
||
retract_before_wipe = 0%
|
||
retract_layer_change = 0
|
||
retract_length = 1
|
||
retract_length_toolchange = 10
|
||
retract_lift = 1
|
||
retract_lift_above = 0
|
||
retract_lift_below = 0
|
||
retract_restart_extra = 0
|
||
retract_restart_extra_toolchange = 0
|
||
retract_speed = 15
|
||
silent_mode = 0
|
||
single_extruder_multi_material = 0
|
||
start_gcode = M220 S100; set speed to 100%\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nM420 S1; turn back on mesh leveling\nG92 E0 ; set extruder pos to zero\n\n; homing loading mesh\nG29 O V4; try to probe mesh, but skip if already done.\n\nG1 Z1.5 F4500\n\n; Purge Line\n\nG1 X145 Y 145\nG1 Z1 ; small z-hop to avoid potentially big purge getting caught.\nG1 E1.25 F450\nG1 X5 Y145 E.33109 F900
|
||
template_custom_gcode =
|
||
thumbnails = 64x64,400x300
|
||
thumbnails_format = PNG
|
||
toolchange_gcode =
|
||
use_firmware_retraction = 0
|
||
use_relative_e_distances = 1
|
||
use_volumetric_e = 0
|
||
variable_layer_height = 1
|
||
wipe = 1
|
||
z_offset = 0
|
||
|
||
[printer:*CCP2 0.8mm*]
|
||
autoemit_temperature_commands = 0
|
||
bed_shape = 0x0,135x0,135x135,0x135
|
||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||
between_objects_gcode =
|
||
binary_gcode = 0
|
||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\n; restore position\nG61; \n\n;AFTER_COLOR_CHANGE
|
||
cooling_tube_length = 5
|
||
cooling_tube_retraction = 91.5
|
||
default_filament_profile = "Cocoa Press Chocolates"
|
||
default_print_profile = 0.5
|
||
deretract_speed = 30
|
||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||
extra_loading_move = -2
|
||
extruder_colour = #F27121
|
||
extruder_offset = 0x0
|
||
high_current_on_filament_swap = 0
|
||
host_type = octoprint
|
||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||
machine_limits_usage = time_estimate_only
|
||
machine_max_acceleration_e = 1500
|
||
machine_max_acceleration_extruding = 1500
|
||
machine_max_acceleration_retracting = 1500
|
||
machine_max_acceleration_travel = 1500,1250
|
||
machine_max_acceleration_x = 1500
|
||
machine_max_acceleration_y = 1500
|
||
machine_max_acceleration_z = 500
|
||
machine_max_feedrate_e = 120
|
||
machine_max_feedrate_x = 500
|
||
machine_max_feedrate_y = 500
|
||
machine_max_feedrate_z = 12
|
||
machine_max_jerk_e = 2.5
|
||
machine_max_jerk_x = 10
|
||
machine_max_jerk_y = 10
|
||
machine_max_jerk_z = 0.2
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 0
|
||
max_layer_height = 0.8
|
||
max_print_height = 150
|
||
min_layer_height = 0.2
|
||
multimaterial_purging = 140
|
||
nozzle_diameter = 0.8
|
||
nozzle_high_flow = 0
|
||
parking_pos_retraction = 92
|
||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||
prefer_clockwise_movements = 0
|
||
print_host =
|
||
printer_settings_id = cocoa_press_minichef2_settings_0_8
|
||
printer_technology = FFF
|
||
printer_variant = CCP2 0.8
|
||
printer_vendor =
|
||
printhost_apikey =
|
||
printhost_cafile =
|
||
remaining_times = 0
|
||
retract_before_travel = 3
|
||
retract_before_wipe = 0%
|
||
retract_layer_change = 0
|
||
retract_length = 1
|
||
retract_length_toolchange = 10
|
||
retract_lift = 0.5
|
||
retract_lift_above = 0
|
||
retract_lift_below = 0
|
||
retract_restart_extra = 0
|
||
retract_restart_extra_toolchange = 0
|
||
retract_speed = 30
|
||
silent_mode = 0
|
||
single_extruder_multi_material = 0
|
||
start_gcode = G90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nG92 E0 ; set extruder pos to zero\n\n; loading mesh\nBED_MESH_PROFILE LOAD=default\n\nG1 Z1.5 F4500\n\n\n; G0 X{first_layer_print_min[0]-4.33} Y{first_layer_print_min[1]-12.5}\n; G0 Z0.8\n; G1 X{first_layer_print_min[0]+30} Y{first_layer_print_min[1]-12.5} E.75 F300 ; R-5.0 E3.0 F15\n\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y133 Z3.2\nG1 X128.625 Y133 Z.5 E.15\nG1 X8.25 Y133 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y130 F900\nG1 X131.25 Y130 E.10538\n;G1 X141.75 Y130
|
||
template_custom_gcode =
|
||
thumbnails = 64x64/PNG, 400x300/PNG
|
||
thumbnails_format = PNG
|
||
toolchange_gcode =
|
||
travel_lift_before_obstacle = 0
|
||
travel_max_lift = 0
|
||
travel_ramping_lift = 0
|
||
travel_slope = 0
|
||
use_firmware_retraction = 0
|
||
use_relative_e_distances = 1
|
||
use_volumetric_e = 0
|
||
variable_layer_height = 1
|
||
wipe = 1
|
||
z_offset = 0
|
||
|
||
[printer:*CCP2 1.6mm*]
|
||
autoemit_temperature_commands = 0
|
||
bed_shape = 0x0,135x0,135x135,0x135
|
||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n\n
|
||
between_objects_gcode =
|
||
binary_gcode = 0
|
||
color_change_gcode = ;BEFORE_COLOR_CHANGE\n\nM83; use relative extrusion for extruder.\nG1 E-.2 F400 ;minor retraction to keep ooze contained.\n\nG60; save position\n\n;move the bed down 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG0 X70 Y5; move to front for user to swap core.\nM17; enable steppers so that the user can change cores without having the extruder or bed slip or move as easily.\n\nM0 Perform core swap now. Press OK when loaded.;\n\n; pause message, lazy edition.\nM117 Preheating core. (waiting 15m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 14m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 13m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 12m);\nG4 S60; pause delay so it's on screen\nM117 Preheating core. (waiting 11m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 10m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 9m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 8m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 7m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 6m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 5m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 4m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 3m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 2m);\nG4 S60; pause delay so it's on screen \nM117 Preheating core. (waiting 1m);\nG4 S60; pause delay so it's on screen \nM0 Press "OK" to continue print. Have the spatula ready.;\n\n;move the bed up 10mm\nG91; set to relative positioning\nG0 Z10;\nG90;\nM83; extruder relative motion.\n\nG1 E.06 F900 ;extrude a lil bit.\nG92 E0 ; set extruder pos to zero\n\n; restore position\nG61; \n\n;AFTER_COLOR_CHANGE
|
||
cooling_tube_length = 5
|
||
cooling_tube_retraction = 91.5
|
||
default_print_profile = 0.5
|
||
deretract_speed = 30
|
||
end_gcode = print_end ;end script from macro\nG91 ; set to relative\nG0 Z15; ; move 15mm down\nG90 ; absolute positioning again\nG0 X70 Y135\nM84
|
||
extra_loading_move = -2
|
||
extruder_colour = #F27121
|
||
extruder_offset = 0x0
|
||
high_current_on_filament_swap = 0
|
||
host_type = octoprint
|
||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||
machine_limits_usage = time_estimate_only
|
||
machine_max_acceleration_e = 1500
|
||
machine_max_acceleration_extruding = 1500
|
||
machine_max_acceleration_retracting = 1500
|
||
machine_max_acceleration_travel = 1500,1250
|
||
machine_max_acceleration_x = 1500
|
||
machine_max_acceleration_y = 1500
|
||
machine_max_acceleration_z = 500
|
||
machine_max_feedrate_e = 120
|
||
machine_max_feedrate_x = 500
|
||
machine_max_feedrate_y = 500
|
||
machine_max_feedrate_z = 12
|
||
machine_max_jerk_e = 2.5
|
||
machine_max_jerk_x = 10
|
||
machine_max_jerk_y = 10
|
||
machine_max_jerk_z = 0.2
|
||
machine_min_extruding_rate = 0
|
||
machine_min_travel_rate = 0
|
||
max_layer_height = 1.6
|
||
max_print_height = 150
|
||
min_layer_height = 0.2
|
||
multimaterial_purging = 140
|
||
nozzle_diameter = 1.6
|
||
nozzle_high_flow = 0
|
||
parking_pos_retraction = 92
|
||
pause_print_gcode = ; Start Pause Print\n; This pause GCode is changed in PrusaSlicer via the Print Settings -> Output Options -> G-Code Substititons\n; This is due to how PrusaSlicer inserts the M117 message for pause at the start of any custom GCode in this\n; box. As such, to soft-park the toolhead, handle retractions, and more, this is done in custom G-Code inj-\n; -ected before this message. Furthering this, due to a bug in how Marlin handles M117 messages on our di-\n; -splay, we use M0 instead, hence the use of the second G-Code substitution regex.\n; Thank you for understanding.\n\n\nG90; Set absolute coordinate moves\nM83; set extruder relative.\nG61 F15000 XY ; move to last XY position.\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG1 E.6 F300; Purge small amount of Cocoa Core via extruder after pause.\n\nG61 F15000 Z; move to last Z position (10mm offset, probably)\nM400; wait for move to finish.\nG4 P100; small delay (100ms) to get around desync issues.\n\nG92 E0; Set extruder to "zero" so that it's not remembered.\nG1 E.00001 900; very small move to reset feedrate bug.\n
|
||
prefer_clockwise_movements = 0
|
||
print_host =
|
||
printer_settings_id = cocoa_press_minichef2_settings_1_6
|
||
printer_technology = FFF
|
||
printer_variant = CCP2 1.6
|
||
printer_vendor =
|
||
printhost_apikey =
|
||
printhost_cafile =
|
||
remaining_times = 0
|
||
retract_before_travel = 3
|
||
retract_before_wipe = 0%
|
||
retract_layer_change = 0
|
||
retract_length = 1
|
||
retract_length_toolchange = 10
|
||
retract_lift = 0.5
|
||
retract_lift_above = 0
|
||
retract_lift_below = 0
|
||
retract_restart_extra = 0
|
||
retract_restart_extra_toolchange = 0
|
||
retract_speed = 30
|
||
silent_mode = 0
|
||
single_extruder_multi_material = 0
|
||
start_gcode = G90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nG28; home all axes\nG92 E0 ; set extruder pos to zero\n\n; loading mesh\nBED_MESH_PROFILE LOAD=default\n\nG1 Z1.5 F4500\n\n\n; G0 X{first_layer_print_min[0]-4.33} Y{first_layer_print_min[1]-12.5}\n; G0 Z0.8\n; G1 X{first_layer_print_min[0]+30} Y{first_layer_print_min[1]-12.5} E.75 F300 ; R-5.0 E3.0 F15\n\n\nG1 Z1.5 F4500\n\n; Purge Line 1\n\nG1 X131.75 Y133 Z3.2\nG1 X128.625 Y133 Z.5 E.15\nG1 X8.25 Y133 E.25 F900\n\n; Purge Line 2\n\nG1 X8.25 Y130 F900\nG1 X131.25 Y130 E.10538\n;G1 X141.75 Y130
|
||
template_custom_gcode =
|
||
thumbnails = 64x64/PNG, 400x300/PNG
|
||
thumbnails_format = PNG
|
||
toolchange_gcode =
|
||
travel_lift_before_obstacle = 0
|
||
travel_max_lift = 0
|
||
travel_ramping_lift = 0
|
||
travel_slope = 0
|
||
use_firmware_retraction = 0
|
||
use_relative_e_distances = 1
|
||
use_volumetric_e = 0
|
||
variable_layer_height = 1
|
||
wipe = 1
|
||
z_offset = 0
|
||
|
||
[printer:Cocoa Press｜0.8mm]
|
||
inherits = *CCP1 0.8mm*
|
||
default_filament_profile = "Cocoa Press Chocolates"
|
||
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
|
||
gcode_flavor = marlin2
|
||
extruder_clearance_height = 60
|
||
extruder_clearance_radius = 65
|
||
printer_model = Cocoa_Press
|
||
|
||
[printer:Cocoa Press｜1.6mm]
|
||
inherits = *CCP1 1.6mm*
|
||
default_filament_profile = "Cocoa Press Chocolates"
|
||
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
|
||
gcode_flavor = marlin2
|
||
extruder_clearance_height = 60
|
||
extruder_clearance_radius = 65
|
||
printer_model = Cocoa_Press
|
||
|
||
[printer:Cocoa Press 2｜0.8mm]
|
||
inherits = *CCP2 0.8mm*
|
||
default_filament_profile = "Cocoa Press Chocolates"
|
||
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
|
||
gcode_flavor = klipper
|
||
extruder_clearance_height = 60
|
||
extruder_clearance_radius = 65
|
||
printer_model = Cocoa_Press2
|
||
|
||
[printer:Cocoa Press 2｜1.6mm]
|
||
inherits = *CCP2 1.6mm*
|
||
default_filament_profile = "Cocoa Press Chocolates"
|
||
printer_notes = PRINTER_VENDOR_COCOA_PRESS\nPRINTER_MODEL_MINICHEF\nPRINTER_MATERIAL_PASTE\nNO_TEMPLATES
|
||
gcode_flavor = klipper
|
||
extruder_clearance_height = 60
|
||
extruder_clearance_radius = 65
|
||
printer_model = Cocoa_Press2
|
||
|