from arch
This commit is contained in:
Nathan Lebrun
864
config/PrusaSlicer/cache/vendor/BIBO.ini
generated
vendored
Normal file
864
config/PrusaSlicer/cache/vendor/BIBO.ini
generated
vendored
Normal file
@@ -0,0 +1,864 @@
|
||||
# Print profiles for the BIBO printers.
|
||||
|
||||
[vendor]
|
||||
repo_id = non-prusa-fff
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = BIBO
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 1.1.1
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
|
||||
|
||||
# The printer models will be shown by the Configuration Wizard in this order,
|
||||
# also the first model installed & the first nozzle installed will be activated after install.
|
||||
# Printer model name will be shown by the installation wizard.
|
||||
|
||||
[printer_model:BIBO2]
|
||||
name = BIBO2 Touch
|
||||
variants = 0.4
|
||||
technology = FFF
|
||||
family = BIBO2
|
||||
bed_model = BIBO2_bed.stl
|
||||
bed_texture = BIBO2.svg
|
||||
default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2; Prusament PLA @BIBO2; Prusament PETG @BIBO2
|
||||
|
||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||
# not make it into the user interface.
|
||||
|
||||
# Common print preset
|
||||
thumbnail = BIBO2_thumbnail.png
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = monotonic
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 0.95
|
||||
bridge_speed = 20
|
||||
brim_width = 0
|
||||
clip_multipart_objects = 1
|
||||
compatible_printers =
|
||||
complete_objects = 0
|
||||
dont_support_bridges = 1
|
||||
elefant_foot_compensation = 0.3
|
||||
ensure_vertical_shell_thickness = 0
|
||||
external_fill_pattern = monotonic
|
||||
external_perimeters_first = 0
|
||||
external_perimeter_extrusion_width = 0.40
|
||||
external_perimeter_speed = 25
|
||||
extra_perimeters = 0
|
||||
extrusion_width = 0.45
|
||||
fill_angle = 45
|
||||
fill_density = 15%
|
||||
fill_pattern = supportcubic
|
||||
first_layer_extrusion_width = 0.42
|
||||
first_layer_height = 0.2
|
||||
first_layer_speed = 20
|
||||
gap_fill_speed = 15
|
||||
gcode_comments = 0
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
infill_extrusion_width = 0.45
|
||||
infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 20%
|
||||
interface_shells = 0
|
||||
max_print_speed = 60
|
||||
max_volumetric_extrusion_rate_slope_negative = 0
|
||||
max_volumetric_extrusion_rate_slope_positive = 0
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 4
|
||||
notes =
|
||||
overhangs = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
|
||||
perimeters = 3
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.45
|
||||
perimeter_generator = arachne
|
||||
post_process =
|
||||
print_settings_id =
|
||||
raft_layers = 0
|
||||
resolution = 0
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 0
|
||||
skirts = 3
|
||||
skirt_distance = 2
|
||||
skirt_height = 1
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.45
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_extruder = 0
|
||||
support_material_extrusion_width = 0.40
|
||||
support_material_interface_extruder = 0
|
||||
support_material_angle = 0
|
||||
support_material_buildplate_only = 1
|
||||
support_material_enforce_layers = 0
|
||||
support_material_contact_distance = 0.15
|
||||
support_material_interface_contact_loops = 0
|
||||
support_material_interface_layers = 2
|
||||
support_material_interface_spacing = 0.2
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2
|
||||
support_material_speed = 40
|
||||
support_material_style = organic
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 45
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 61%
|
||||
thin_walls = 0
|
||||
top_infill_extrusion_width = 0.40
|
||||
top_solid_infill_speed = 20
|
||||
travel_speed = 130
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
wipe_tower_rotation_angle = 0
|
||||
wipe_tower_width = 60
|
||||
wipe_tower_x = 50
|
||||
wipe_tower_y = 50
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:*0.05mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 10
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 0.7
|
||||
default_acceleration = 500
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 20%
|
||||
first_layer_acceleration = 250
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 30
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.05
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 30
|
||||
top_solid_infill_speed = 20
|
||||
top_solid_layers = 15
|
||||
|
||||
[print:*0.07mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 8
|
||||
bridge_acceleration = 300
|
||||
bridge_flow_ratio = 0.7
|
||||
bridge_speed = 20
|
||||
default_acceleration = 1000
|
||||
external_perimeter_speed = 20
|
||||
fill_density = 15%
|
||||
first_layer_acceleration = 500
|
||||
gap_fill_speed = 20
|
||||
infill_acceleration = 800
|
||||
infill_speed = 40
|
||||
max_print_speed = 60
|
||||
small_perimeter_speed = 20
|
||||
solid_infill_speed = 40
|
||||
support_material_extrusion_width = 0.3
|
||||
support_material_spacing = 1.5
|
||||
layer_height = 0.07
|
||||
perimeter_acceleration = 300
|
||||
perimeter_speed = 30
|
||||
perimeters = 3
|
||||
support_material_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
top_solid_layers = 11
|
||||
|
||||
[print:*0.10mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 7
|
||||
bridge_flow_ratio = 0.7
|
||||
layer_height = 0.1
|
||||
perimeter_acceleration = 800
|
||||
top_solid_layers = 9
|
||||
|
||||
[print:*0.12mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.12
|
||||
perimeters = 3
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 6
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.15mm*]
|
||||
inherits = *common*
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 50
|
||||
layer_height = 0.15
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 5
|
||||
top_solid_layers = 7
|
||||
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.20
|
||||
top_infill_extrusion_width = 0.4
|
||||
bottom_solid_layers = 4
|
||||
top_solid_layers = 5
|
||||
|
||||
[print:*0.24mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.24
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.28mm*]
|
||||
inherits = *common*
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 25
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
layer_height = 0.28
|
||||
top_infill_extrusion_width = 0.45
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*0.30mm*]
|
||||
inherits = *common*
|
||||
bottom_solid_layers = 4
|
||||
bridge_flow_ratio = 0.95
|
||||
external_perimeter_speed = 25
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 60
|
||||
layer_height = 0.3
|
||||
perimeter_acceleration = 800
|
||||
perimeter_speed = 50
|
||||
solid_infill_speed = 50
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_layers = 4
|
||||
|
||||
[print:*soluble_support*]
|
||||
inherits = *common*
|
||||
overhangs = 1
|
||||
skirts = 0
|
||||
support_material = 1
|
||||
support_material_contact_distance = 0
|
||||
support_material_extruder = 2
|
||||
support_material_extrusion_width = 0.45
|
||||
support_material_interface_extruder = 2
|
||||
support_material_interface_layers = 3
|
||||
support_material_interface_spacing = 0.1
|
||||
support_material_synchronize_layers = 1
|
||||
support_material_threshold = 80
|
||||
support_material_with_sheath = 1
|
||||
wipe_tower_bridging = 6
|
||||
support_material_interface_speed = 80%
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.05mm ULTRADETAIL @BIBO2]
|
||||
inherits = *0.05mm*
|
||||
# alias = 0.05mm ULTRADETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.07mm SUPERDETAIL @BIBO2]
|
||||
inherits = *0.07mm*
|
||||
# alias = 0.07mm SUPERDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.10mm HIGHDETAIL @BIBO2]
|
||||
inherits = *0.10mm*
|
||||
# alias = 0.10mm HIGHDETAIL
|
||||
infill_extrusion_width = 0.5
|
||||
|
||||
[print:0.12mm DETAIL @BIBO2]
|
||||
inherits = *0.12mm*
|
||||
# alias = 0.12mm DETAIL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.15mm OPTIMAL @BIBO2]
|
||||
inherits = *0.15mm*
|
||||
# alias = 0.15mm OPTIMAL
|
||||
top_infill_extrusion_width = 0.45
|
||||
|
||||
[print:0.20mm NORMAL @BIBO2]
|
||||
inherits = *0.20mm*
|
||||
# alias = 0.20mm NORMAL
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.24mm DRAFT @BIBO2]
|
||||
inherits = *0.24mm*
|
||||
# alias = 0.24mm DRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.28mm SUPERDRAFT @BIBO2]
|
||||
inherits = *0.28mm*
|
||||
# alias = 0.28mm SUPERDRAFT
|
||||
travel_speed = 130
|
||||
infill_speed = 50
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
[print:0.30mm ULTRADRAFT @BIBO2]
|
||||
inherits = *0.30mm*
|
||||
# alias = 0.30mm ULTRADRAFT
|
||||
bottom_solid_layers = 3
|
||||
bridge_speed = 30
|
||||
external_perimeter_speed = 30
|
||||
infill_acceleration = 1100
|
||||
infill_speed = 55
|
||||
max_print_speed = 60
|
||||
perimeter_speed = 50
|
||||
small_perimeter_speed = 30
|
||||
solid_infill_speed = 50
|
||||
top_solid_infill_speed = 40
|
||||
support_material_speed = 45
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
extrusion_width = 0.5
|
||||
first_layer_extrusion_width = 0.42
|
||||
infill_extrusion_width = 0.5
|
||||
perimeter_extrusion_width = 0.5
|
||||
solid_infill_extrusion_width = 0.5
|
||||
top_infill_extrusion_width = 0.45
|
||||
support_material_extrusion_width = 0.38
|
||||
|
||||
# Soluble Supports Profiles for dual extrusion #
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 25
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_infill_extrusion_width = 0.45
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
|
||||
inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
external_perimeter_speed = 30
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
|
||||
support_material_extruder = 2
|
||||
perimeter_speed = 40
|
||||
solid_infill_speed = 40
|
||||
top_solid_infill_speed = 30
|
||||
|
||||
[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
|
||||
inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
|
||||
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
support_material_interface_layers = 3
|
||||
support_material_with_sheath = 0
|
||||
support_material_xy_spacing = 80%
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- filament ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
# Common filament preset
|
||||
[filament:*common*]
|
||||
cooling = 0
|
||||
compatible_printers =
|
||||
extrusion_multiplier = 1
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_cost = 0
|
||||
filament_density = 0
|
||||
filament_diameter = 1.75
|
||||
filament_notes = ""
|
||||
filament_settings_id = ""
|
||||
filament_soluble = 0
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
|
||||
|
||||
[filament:*PLA*]
|
||||
inherits = *common*
|
||||
bed_temperature = 60
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #FF3232
|
||||
filament_max_volumetric_speed = 15
|
||||
filament_type = PLA
|
||||
filament_density = 1.24
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
fan_always_on = 1
|
||||
cooling = 1
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 100
|
||||
bridge_fan_speed = 100
|
||||
disable_fan_first_layers = 3
|
||||
temperature = 200
|
||||
|
||||
[filament:*PET*]
|
||||
inherits = *common*
|
||||
bed_temperature = 70
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FF8000
|
||||
filament_max_volumetric_speed = 8
|
||||
filament_type = PETG
|
||||
filament_density = 1.27
|
||||
filament_cost = 30
|
||||
first_layer_bed_temperature =70
|
||||
first_layer_temperature = 240
|
||||
fan_always_on = 1
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 20
|
||||
bridge_fan_speed = 100
|
||||
temperature = 240
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
bed_temperature = 100
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
fan_below_layer_time = 20
|
||||
filament_colour = #FFF2EC
|
||||
filament_max_volumetric_speed = 11
|
||||
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_type = ABS
|
||||
filament_density = 1.04
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 100
|
||||
first_layer_temperature = 245
|
||||
fan_always_on = 0
|
||||
max_fan_speed = 0
|
||||
min_fan_speed = 0
|
||||
bridge_fan_speed = 25
|
||||
top_fan_speed = 0
|
||||
temperature = 245
|
||||
|
||||
[filament:*FLEX*]
|
||||
inherits = *common*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 80
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 3
|
||||
extrusion_multiplier = 1.2
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 100
|
||||
filament_colour = #008000
|
||||
filament_max_volumetric_speed = 1.5
|
||||
filament_type = FLEX
|
||||
first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 70
|
||||
#start_filament_gcode = "M900 K0"; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 0.8
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
|
||||
[filament:Generic PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Generic
|
||||
filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
|
||||
[filament:BIBO White PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_colour = #FFFFFF
|
||||
filament_vendor = BIBO
|
||||
filament_notes = "General Settings for the BIBO White Filament Which is included with the printer"
|
||||
filament_cost = 20
|
||||
first_layer_bed_temperature = 30
|
||||
bed_temperature = 30
|
||||
first_layer_temperature = 200
|
||||
temperature = 190
|
||||
|
||||
[filament:Generic PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic ABS @BIBO2]
|
||||
inherits = *ABS*
|
||||
first_layer_bed_temperature = 90
|
||||
bed_temperature = 90
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Esun ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Esun
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Hatchbox ABS @BIBO2]
|
||||
inherits = Generic ABS @BIBO2
|
||||
filament_vendor = Hatchbox
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.08
|
||||
fan_always_on = 0
|
||||
cooling = 0
|
||||
min_fan_speed = 15
|
||||
max_fan_speed = 15
|
||||
slowdown_below_layer_time = 20
|
||||
disable_fan_first_layers = 4
|
||||
fan_below_layer_time = 20
|
||||
bridge_fan_speed = 25
|
||||
|
||||
[filament:Generic HIPS @BIBO2]
|
||||
inherits = *ABS*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 27.3
|
||||
filament_density = 1.04
|
||||
bridge_fan_speed = 50
|
||||
cooling = 1
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 10
|
||||
filament_colour = #FFFFD7
|
||||
filament_soluble = 1
|
||||
filament_type = HIPS
|
||||
first_layer_temperature = 230
|
||||
max_fan_speed = 20
|
||||
min_fan_speed = 20
|
||||
temperature = 230
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:AMOLEN bronze PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = AMOLEN
|
||||
temperature = 205
|
||||
bed_temperature = 65
|
||||
filament_colour = #808040
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 215
|
||||
filament_cost = 25.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PLA @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 215
|
||||
bed_temperature = 60
|
||||
first_layer_temperature = 215
|
||||
first_layer_bed_temperature = 60
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.24
|
||||
|
||||
[filament:Prusament PETG @BIBO2]
|
||||
inherits = *PET*
|
||||
filament_vendor = Prusa Polymers
|
||||
temperature = 245
|
||||
bed_temperature = 70
|
||||
first_layer_temperature = 245
|
||||
first_layer_bed_temperature =70
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
|
||||
[filament:PrimaSelect PVA+ @BIBO2]
|
||||
inherits = *PLA*
|
||||
filament_vendor = PrimaSelect
|
||||
filament_cost = 108
|
||||
filament_density = 1.23
|
||||
cooling = 0
|
||||
fan_always_on = 0
|
||||
filament_colour = #FFFFD7
|
||||
filament_max_volumetric_speed = 3.8
|
||||
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_soluble = 1
|
||||
filament_type = PVA
|
||||
first_layer_temperature = 195
|
||||
temperature = 195
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:No Filament - standby only @BIBO2]
|
||||
first_layer_temperature = 170
|
||||
temperature = 170
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
|
||||
|
||||
[filament:Generic FLEX @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Generic
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
|
||||
[filament:Overture TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Overture
|
||||
filament_max_volumetric_speed = 1.5
|
||||
first_layer_temperature = 235
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 235
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 23.99
|
||||
filament_density = 1.21
|
||||
|
||||
[filament:SainSmart TPU @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = SainSmart
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 80
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 32.99
|
||||
filament_density = 1.21
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = nil
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
[filament:Filatech FilaFlex40 @BIBO2]
|
||||
inherits = *FLEX*
|
||||
filament_vendor = Filatech
|
||||
fan_always_on = 1
|
||||
filament_max_volumetric_speed = 2.5
|
||||
extrusion_multiplier = 1.15
|
||||
first_layer_temperature = 230
|
||||
first_layer_bed_temperature = 50
|
||||
temperature = 230
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
filament_retract_before_travel = 3
|
||||
filament_cost = 51.45
|
||||
filament_density = 1.22
|
||||
filament_retract_length = 0.5
|
||||
filament_retract_speed = 20
|
||||
filament_deretract_speed = 15
|
||||
filament_retract_lift = 0
|
||||
filament_wipe = 0
|
||||
disable_fan_first_layers = 3
|
||||
min_print_speed = 15
|
||||
slowdown_below_layer_time = 10
|
||||
cooling = 1
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
|
||||
# XXX--- Printer settings ---XXX
|
||||
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
|
||||
|
||||
# Common printer preset
|
||||
[printer:*common*]
|
||||
printer_technology = FFF
|
||||
bed_shape = -107x-93,107x-93,107x93,-107x93
|
||||
printer_vendor = BIBO
|
||||
printer_model = BIBO2
|
||||
printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
|
||||
printer_variant = 0.4
|
||||
nozzle_diameter = 0.4
|
||||
default_print_profile = 0.20mm NORMAL @BIBO2
|
||||
default_filament_profile = Generic PLA @BIBO2
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0 # By setting this value to 0 deretract used the retract_speed
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
extruder_clearance_height = 12
|
||||
extruder_clearance_radius = 45
|
||||
gcode_flavor = marlin
|
||||
silent_mode = 0
|
||||
remaining_times = 0
|
||||
machine_max_acceleration_x = 1100
|
||||
machine_max_acceleration_y = 1100
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_acceleration_e = 5000
|
||||
machine_max_acceleration_extruding = 1100
|
||||
machine_max_acceleration_retracting = 1100
|
||||
machine_max_feedrate_x = 350
|
||||
machine_max_feedrate_y = 350
|
||||
machine_max_feedrate_z = 2
|
||||
machine_max_feedrate_e = 25
|
||||
machine_max_jerk_x = 10
|
||||
machine_max_jerk_y = 10
|
||||
machine_max_jerk_z = 0.3
|
||||
machine_max_jerk_e = 5
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
||||
max_layer_height = 0.30
|
||||
min_layer_height = 0.05
|
||||
max_print_height = 160
|
||||
printer_settings_id =
|
||||
retract_before_travel = 1
|
||||
retract_before_wipe = 100%
|
||||
retract_layer_change = 1
|
||||
retract_length = 1.5
|
||||
retract_length_toolchange = 1.5
|
||||
retract_lift = 0
|
||||
retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 20
|
||||
single_extruder_multi_material = 0
|
||||
toolchange_gcode =
|
||||
use_firmware_retraction = 0
|
||||
use_relative_e_distances = 1
|
||||
use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
|
||||
# Intended for printers that have been modified with a 32bit mainboard or otherwise use marlin 2 firmware
|
||||
[printer:*marlin2*]
|
||||
gcode_flavor = marlin2
|
||||
|
||||
|
||||
[printer:BIBO2 Touch Dual extrusion]
|
||||
inherits = *common*
|
||||
deretract_speed = 0,0 # Setting this value to 0 uses the retract speed
|
||||
extruder_colour = #FFFF00;#229403
|
||||
extruder_offset = 0x0,0x0
|
||||
max_layer_height = 0.3,0.3
|
||||
min_layer_height = 0.05,0.05
|
||||
nozzle_diameter = 0.4,0.4
|
||||
retract_before_travel = 1,1
|
||||
retract_before_wipe = 100%,100%
|
||||
retract_layer_change = 1,1
|
||||
retract_length = 1.5,1.5
|
||||
retract_length_toolchange = 1.5,1.5
|
||||
retract_lift = 0,0
|
||||
retract_lift_above = 0,0
|
||||
retract_lift_below = 0,0
|
||||
retract_restart_extra = 0,0
|
||||
retract_restart_extra_toolchange = 0,0
|
||||
retract_speed = 20,20
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2.0 F400 ; move the platform down 2mm\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool]; switch to initial tool position\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
|
||||
wipe = 1,1
|
||||
|
||||
|
||||
[printer:BIBO2 Touch E1 right only extrusion]
|
||||
inherits = *common*
|
||||
extruder_colour = #FFFF00
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
|
||||
|
||||
[printer:BIBO2 Touch E2 left only extrusion]
|
||||
inherits = *common*
|
||||
extruder_colour = #229403
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nT0 ; switch to tool position T0\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
|
||||
|
||||
# Ditto Printing options with custom beds and special start end gcode for print duplication from one nozzle to the other
|
||||
[printer:BIBO2 E1 right E2 Ditto]
|
||||
inherits = BIBO2 Touch E1 right only extrusion
|
||||
bed_shape = 0x-93,33x-93,33x93,0x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T1 ; set 2nd nozzle heater to print temperature\nG92 E0\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
|
||||
[printer:BIBO2 E2 left E1 Ditto]
|
||||
inherits = BIBO2 Touch E2 left only extrusion
|
||||
bed_shape = -33x-93,0x-93,0x93,-33x93
|
||||
#bed_model = BIBO2_bed.stl
|
||||
#bed_texture = BIBO2.svg
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\nG92 E0\n
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
# A bunch of Marlin 2 printer profiles versions with BLTouch leveling
|
||||
|
||||
[printer:BIBO M2 BLTouch Dual extrusion]
|
||||
inherits = BIBO2 Touch Dual extrusion; *marlin2*
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers With Marlin 2 and BLTouch\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG29 ; Auto bed-level (BL-Touch) with just the bed heated\nG1 Z2.0 F400 ; move the platform down 2mm\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool]; switch to initial tool position\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
|
||||
|
||||
|
||||
[printer:BIBO M2 BLTouch E1 right only extrusion]
|
||||
inherits = BIBO2 Touch E1 right only extrusion; *marlin2*
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0) With Marlin 2 and BLTouch\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG29 ; Auto bed-level (BL-Touch) with just the bed heated\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
|
||||
|
||||
[printer:BIBO M2 BLTouch E2 left only extrusion]
|
||||
inherits = BIBO2 Touch E2 left only extrusion; *marlin2*
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1) With Marlin 2 and BLTouch\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nT0 ; switch to tool position T0\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG29 ; Auto bed-level (BL-Touch) with just the bed heated\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
|
||||
|
||||
[printer:BIBO M2 E1 right E2 Ditto BLTouch]
|
||||
inherits = BIBO2 E1 right E2 Ditto; *marlin2*
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 right (i.e. T0) E2 Ditto With Marlin 2 and BLTouch\nM605 S2 E1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]} ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG29 ; Auto bed-level (BL-Touch) with just the bed heated\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nT[initial_tool] ; switch to initial tool position\nG92 E0.0 ; reset extruder\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM605 S2 E0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
|
||||
|
||||
[printer:BIBO M2 E2 left E1 Ditto BLTouch]
|
||||
inherits = BIBO2 E2 left E1 Ditto; *marlin2*
|
||||
start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 left (i.e. T1) E1 Ditto With Marlin 2 and BLTouch\nM605 S2 E1 ; Turn on Ditto Printing\nG21 ; set units to metric\nG90 ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nT0 ; Start at T0 to avoid extruder nozzle offset issues\nG28 X0 Y0 ; move X/Y to min endstops\nG28 Z0 ; move Z to min endstops\nG29 ; Auto bed-level (BL-Touch) with just the bed heated\nG1 Z2 F400 ; move the print bed down 2mm\nG92 E0.0 ; zero the current extruder coordinate\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0 ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2 ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4 ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0 ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6 ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0 ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8 ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
|
||||
end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0 ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90 ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84 ; Turn steppers off\nM605 S2 E0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
|
||||
Reference in New Issue
Block a user